Xerox DocuPrint C55, Supplementary Manual

Page: 332 / 395

S Y S T E M M A I N T E N A N C E 9
Printer Relocation
If you need to relocate your printer, read the following descriptions to
decide which type of move you are performing.
•
Simple Move If you are moving your printer within the same building
and there are no major obstacles such as stairs, a very rough floor
surface use the Simple Move procedure provided in this document.
•
Complex Move If the printer will be transported in a motor vehicle to
the new site it is recommended you use the Xerox Repack Kit to avoid
damage to the printer during the move. You can order the Repack Kit
from your dealer or Xerox.
Simple Move
PREPARE YOUR NEW LOCATION
Ensure that the new location meets the following requirements:
POWER REQUIREMENTS
110-130 VAC, 50/60 Hz, or 180-260 VAC, 50/60 Hz.
SPACE REQUIREMENTS
•
Minimum room size of 10 cubic meters (approximately 8 ft. x 8 ft. x 8
ft, or 242 cm x 242 cm x 242 cm).
•
Side and rear clearance of 10 inches (25 cm).
•
Front clearance of 24 inches (61 cm).
•
A firm, level surface for the printer.