Xerox DocuPrint C55, Supplementary Manual, Page: 244 / 395

C E N T R E W A R E D P S O F T W A R E I N S T R U C T I O N S 41
Create/Edit The Login Script
Edit the system, group, or user login script(s) whose printer drivers are to
be installed. Add the lines shown in the example below.
In the following example the sysadmin sets up a login script on a NetWare
4.1X server that looks like this:
EXAMPLE:
MAP R V:=<servername>\<volume:>\<path>
V:
#V:DRVINST.EXE C:\WINDOWS V:
NOTE:
<servername>=Your fileserver name
<volume:>=Logical Volume Name (ie. SYS:, VOL1:)
<path>= directory where you installed the Printer drivers during
installation (ie. \cntrware\cw_cdi)
The three lines in the example above remain the same regardless of the type
of script in which they are used. V: is only an example, you may substitute
another drive letter if you wish.
The utility which is run from the login script is called DRVINST.EXE and
takes two parameters upon execution. The first parameter is the fully
qualified path (including drive letter) to the user’s WIN.INI file. The
second parameter is the directory where the WDRVINST.EXE and
WDRVINST.INF files reside.
NOTE: DRVINST.EXE expects that the WDRVINST.EXE and
WDRVINST.INF files reside in the same directory on the server.