Xerox DocuPrint C55, Supplementary Manual

Page: 157 / 395

U N I X 11
Print Queue Management
Introduction
The section of the document guides you step-by-step through the
installation of a new printer. It is recommended that you use
CentreWare DP Setup Wizard to initially configure your printer. You
may set up your printer to be accessed with different printing models.
These models are as follows:
•
Workstation to Printer - This printing model is used to spool
print jobs in a queue on your local workstation then send them to
the printer. You must also use this model at a remote workstation
that will act as a print server.
•
Workstation to Print Server - This printing model is used to
spool print jobs to a queue on a remote workstation (or a printer
itself ).