Xerox DocuPrint C55 Supplementary Manual Download Page 26

Page: 26 / 395

I N T R O D U C T I O N 21

•

Follow the recommended procedure when moving the printer from one
location to another.

•

Do not put containers of coffee or other liquids onto the printer.

•

Do not block or cover the slots and openings on the printer. Without
adequate ventilation, the printer may overheat.

WARNING: Be careful when working in areas identified with this warming
symbol. These areas may be very hot and could cause personal injury.

•

Frequent operation of the on/off switch is not recommended.

•

Keep hands, hair, and neckties away from the exit feed rollers.

•

Do not remove a media tray while printing from a single tray
configuration.

•

Do not open the Top Cover while printing.

•

Do not switch off the printer power while printing.

•

Do not move the printer while printing.

Summary of Contents for DocuPrint C55












































































































































































































































































































































































































Search results

Summary of Contents for DocuPrint C55

Reviews:

Related manuals for DocuPrint C55

Brands by name

Popular brands

Xerox DocuPrint C55, Supplementary Manual

Search results

Summary of Contents for DocuPrint C55

Reviews:

Related manuals for DocuPrint C55

Brands by name

Popular brands