manualshive.com logo in svg

Xerox DocuPrint C55, Supplementary Manual, Page: 152 / 395

Share
Download
Xerox DocuPrint C55 Supplementary Manual Download Page 152

U  N  I  X   6

UNIX Software Installation

SOLARIS 1.1X , 2.X Step-by-Step Setup

1.

 

Verify physical cable connections from your printer to the
network.

2.

 

Assign the DocuPrint printer an IP Address at the Control Panel.

3.

 

Add your DocuPrint printer’s TCP/IP address and hostname to
your NIS database.  For non-NIS networks, add the TCP/IP
address and hostname to your machine’s /etc/hosts table.

4.

 

Verify IP connectivity with the UNIX “ping” command.

5.

 

TYPE: ping <printer_hostname> [ENTER].

NOTE:  To print, the ping command MUST return
<printer_hostname> is alive.  If it does not, then proceed to the
TCP/IP Troubleshooting section of this chapter.

6.

 

Insert DocuPrint PostScript Print Tool installation diskette #1
into the floppy drive of your system.

Summary of Contents for DocuPrint C55












































































































































































































































































































































































































Reviews:

No comments