Xerox DocuPrint C55, Supplementary Manual

Page: 201 / 395

O S / 2 10
OS/2 Quick Check
1. Check ALL IP addresses and verify that you have set the
DocuPrint printer’s address correctly at the Control Panel.
2. Use the “ping” command to see if your server responds. If the
server does not respond you may have an addressing or network
problem.
3. Use the “ping” command to see if your DocuPrint printer
responds. If the printer does not respond, you may have an
addressing or network problem. Correct these conditions and
retry.
4. Use the “ping” command to see if your gateway responds. If the
gateway does not respond, you may have an addressing or
network problem. Correct these conditions and retry.
5. Check your router, subnet (if applicable), and gateway addresses.
(Incorrect addressing can render your lpr/lpd printing system
unusable.)
6. For OS/2 printing only, is LPRPORTD.EXE running?
7. For OS/2 and WIN-OS/2 printing, is LPRMON.EXE running?
8. Have you applied appropriate Fixpacks, APAR’s (see
compatibility for required Fixpacks). If not, the proper Fixpack
must be applied.
TCP/IP for OS/2 Versions 2.0, 3.0, 3.1, 4.0
1. Make sure the OS/2 SPOOLER Print Priority is at the Maximum
value of 189. (Lowering this value frees up memory resources but
can have adverse affects on printing graphics. Try adjusting the
value to “tune” your server/workstation performance.)
2. Changes to TCP/IP Configuration may require system reboot
rather than the OS/2 Command “TCPSTART.”