Selecting Fax Options for Single Jobs
8-145
Making the Image Lighter or Darker
To lighten or darken an image when it is faxed:
1.
On the control panel, press the
Fax
button.
2.
Select
Lighten/Darken
, and then press the
OK
button.
3.
Press the
Forward
Arrow
or
Back Arrow
to lighten or darken the fax, and then press the
OK
button.
Note:
The factory default is Normal.
Delay Sending a Fax
To send a fax at a specified time (within 24 hours):
1.
On the control panel, press the
Fax
button.
2.
Select
Delayed Start
, and then press the
OK
button.
3.
Select
On
, and then press the
OK
button.
4.
Select the time to send the fax:
■
Select a number from
0
to
23
for the hour, and then press the
Forward
Arrow
or
Back Arrow
button to select minutes.
■
Select a number from
0
to
59
for minutes, and then press the
OK
button.
5.
Press the
Start
button.
The fax is scanned and saved to be sent at the time you specified.
Note:
If the printer is turned
Off
with a Delayed Start job stored, the job will be processed
immediately after the printer is turned back
On
.
Enabling Color Fax
Note:
■
Color Fax transmission is not available during the transmission or reception of other data.
■
When the Document Glass is used for Color Fax, only one page can be scanned for one job.
■
Color Fax may not work properly if the receiving or sending end is not DocuPrint C3290 FS.
■
Even if a communication error occurs during Color Fax transmission, the printer will not retry
transmission.
■
The transfer of Color Fax jobs is not supported.
■
Color Fax is not available for the Direct-Fax feature.
■
Color Fax is not available for group faxing.
To enable the sending of a color fax:
1.
Press the
System
button.
2.
Select
Admin Menu
, and then press the
OK
button.
3.
Select
Fax Settings
, and then press the
OK
button.
4.
Select
Color Fax
, and then press the
OK
button.
5.
Press the
Up
Arrow
or
Down Arrow
to change the setting to
On
.
