Xerox DocuColor DocuColor 4, Administrator'S Manual

Page: 78 / 166

3
56
PServer Setup (NetWare Services)
The Enable PServer mode option must be turned on if you have a Novell
server connected. You can, however, change the PServer polling interval
and then modify either Bindery Setup or NDS Configuration.
To set Enable PServer mode you must first specify an IPX frame type.
This option is located in the Protocol Setup tab.
PServer Setup (NDS Configuration)
In initial setup, the DocuColor 4 LP/CP was connected to the network
and an NDS directory tree, with a Printer, a Print Server, and one or more
Print Queue objects. You can make any changes to that setup through
WebSetup. To modify NDS Setup you may need permission to browse
the NDS tree. If access to the Print Server is restricted, you’ll need a
login password.
Note that the terms NetWare server, Novell server, and IPX server are in
common use and are used here interchangeably to mean the server on an
IPX network running Novell NetWare networking software.
•
Enable NDS
NDS has already been enabled. Uncheck this box only to remove NDS
support.
•
Change Trees...
Click to open the Add NDS Tree window.
•
Add NDS Tree
You can have only one NDS tree, so the following process is required
to change trees:
Select the current NDS tree and click Remove.
Select the new NDS tree and click Add.
3.1 Setup from WebSetup