4
82
To activate the bindery context:
If you cannot reboot the NetWare server at this point, type the set
command manually at the server’s colon prompt.
Use the same command as you entered in the autoexec.ncf file (in step 6
of the previous procedure).
If you can reboot the NetWare server, the set command is loaded
automatically.
You are ready to set up the DocuColor 4 LP/CP print server and print
queue. See the next section for details.
4.3.4
Setting up a DocuColor 4 LP/CP print queue for bindery
For NetWare 3.x and for 4.x in emulation, the NetWare print server and print
queue for DocuColor 4 LP/CP are created and configured from NetWare Print
Console (PCONSOLE), a NetWare utility that is stored in NetWare’s PUB-
LIC directory.
As with NDS, first you create several NetWare entities on a Novell server,
then you select them in Network Setup on the DocuColor 4 LP/CP control
panel.
To set up a NetWare bindery print server for printing to the
DocuColor 4 LP/CP:
Log in to the NetWare server as the Supervisor.
At the NetWare MS-DOS prompt, type pconsole.
If you are using NetWare 4.x in bindery mode, Print Console
(PCONSOLE) has two modes. Press the F4 key to switch to Bindery mode.
The Available Options menu is displayed.
4.3 Configuring a NetWare server for printing
Summary of Contents for DocuColor DocuColor 4
Page 1: ...Xerox DocuColor 4 Administrator Guide 701P31413 August 1999 THE DOCUMENT COMPANY XEROX...
Page 38: ...1 16...
Page 145: ...Appendices...
Page 165: ...i...