![background image](http://html1.mh-extra.com/html/xerox/docucolor-docucolor-4/docucolor-docucolor-4_administrators-manual_3708657151.webp)
129
A
Connect the ribbon cable to the connector J15 (3) on the video controller
board.
Reassemble the DocuColor 4 LP/CP as described on page 127.
Initializing the hard disk
After you install the hard disk and power on the printer/copier, you may be
prompted to initialize the new hard disk. If so, follow the directions below:
•
At the PRESS ENTER TO INITIALIZE DISK screen, press the Enter
button to initialize the disk.
The standard boot up process will continue.
B.3
Installing additional memory
The following section explains how to install a 32MB or 64MB RAM (ran-
dom access memory) DIMM (dual in-line memory module) on the DocuColor
4 LP/CP video controller board.
To install the RAM DIMM (illustrated below) you will need to do the follow-
ing:
•
Access the video controller board.
•
Replace the printer’s 64MB RAM DIMM with a 32MB or 64MB RAM
DIMM, or install a 32MB or 64MB RAM DIMM in either of the two empty
RAM slots on the video controller board.
•
Reassemble the DocuColor 4 LP/CP.
Important:
To avoid electric shock ensure your hands are dry before touching the printer’s
power plug.
B Available Options
Summary of Contents for DocuColor DocuColor 4
Page 1: ...Xerox DocuColor 4 Administrator Guide 701P31413 August 1999 THE DOCUMENT COMPANY XEROX...
Page 38: ...1 16...
Page 145: ...Appendices...
Page 165: ...i...