3
54
3.1 Setup from WebSetup
Subnet Mask
If you need to set the subnet mask, enter one of the
following values:
•
255.0.0.0
if the IP address starts with a number less than 128
•
255.255.0.0
if the IP address starts with a number from 128 through
191
•
255.255.255.0
if the IP address starts with a number greater than 191
Be sure to confirm the subnet mask setting with your network
administrator before proceeding. In some cases the required setting may
be different from those listed.
Gateway
If your TCP/IP network has a gateway, and users outside
the gateway plan to print to the DocuColor 4 LP/CP using TCP/IP, enter
the gateway address here. By default, the loopback address,
127.000.000.001, is set. Obtain the correct gateway address from your
network administrator.
Enable AppleTalk
Enable this option if you have an AppleTalk
network connected to the DocuColor 4 LP/CP. This setting enables the
DocuColor 4 LP/CP to communicate over AppleTalk networks.
Select Zone
The DocuColor 4 LP/CP searches the network for
AppleTalk zones in your network segment. Scroll through the list to select
the AppleTalk zone in which you want the DocuColor 4 LP/CP to appear.
If your segment has only one zone, the DocuColor 4 LP/CP is assigned
to that zone automatically.
If no AppleTalk zone can be found, your network may have no defined
zones, or else the network cable has not been connected Choose OK.
Refer to "Before You Proceed".
Select Frames
Click the Select Frames button to specify IPX frames
used with NetWare. See your network administrator to verify which frame
type to choose.
In the IPX Frames dialog box, select frames and use the Add and Remove
buttons to specify the selected frames.
Summary of Contents for DocuColor DocuColor 4
Page 1: ...Xerox DocuColor 4 Administrator Guide 701P31413 August 1999 THE DOCUMENT COMPANY XEROX...
Page 38: ...1 16...
Page 145: ...Appendices...
Page 165: ...i...