Xerox DocuColor DocuColor 4, Administrator'S Manual

Page: 74 / 166

3
52
3.1 Setup from WebSetup
The Port Setup tab is the first tab displayed in Network Setup. After
setting all the options in the Port Setup tab, click the next tab and continue
to specify settings until you have made settings for all relevant options
in the Network Setup category.
Port Setup tab
The options that you can set from the Port Setup tab are described below.
Enable Ethernet

Enable this option if the DocuColor 4 LP/CP is to
be connected to an Ethernet network.
Transmission Speed

Select Auto Detect if your network
environment is mixed, or select the speed (10 Mbps or 100 Mbps) of the
network to which the DocuColor 4 LP/CP is attached.
Enable Parallel Port

Enable this option if you want to print through
the parallel port. You can connect a single Windows computer to the
parallel port and print directly to the DocuColor 4 LP/CP.
Enabling the parallel port does not conflict with Ethernet communication
with the DocuColor 4 LP/CP.
Ignore EOF Character

Available only if Enable Parallel Port is
enabled, this option specifies that the DocuColor 4 LP/CP should ignore
end-of-file (EOF) messages. Enabling this option is required to print
PostScript files in binary format (not ASCII); under normal circumstances,
this option should not be enabled. When this option is enabled, the
DocuColor 4 LP/CP uses the parallel port timeout value to determine
when the end of the file has been reached.