Xerox DocuColor DocuColor 4, Administrator'S Manual, Page: 125 / 166

5
103
5.2 Configuration Settings List
13. Max. Counts
14. Output Tray
15. Version Info...
16. Diag Test...
17. Transportation
18. Change Language
Use this setting to specify the maximum number of copies allowed
in one copy operation.
Use this setting to specify the delivery tray to use. Note, however,
that even if [Top (face Down Tray)] is selected, transparency sheets,
thick paper and label sheets are always ejected into the face-up
tray.
This setting indicates the version information
Use this setting to perform hardware self-diagnostics.
Use this setting to move the scanner module to prepare for scanner
transportation. This prevents the scanner from any damage caused
during the transportation. Therefore, be sure to perform this task
before transporting the machine
For detailed information see section 2 of the Setup Guide.
Use this setting to set up or change the system administrator pass-
word.
For detailed information, see the "5.5 Changing the system admin-
istrator password" section.
Use this setting to change the language from English to to French.
Language options are location dependent.
1 to 99 copies (99
sheets)
Top (Face Down
Tray)
Left (Face Up Tray)
OFF
ON
OFF
ON
No Set
Set
High Density (-3 to
+3)
Med Density (-3 to
+3)
Low Density (-3 to
+3)
French
English
or another language
Setting Description Possible value