Xerox DocuColor DocuColor 4, Administrator'S Manual, Page: 52 / 166

2
30
2.4.1 I/O Port Setup
The I/O Port Setup menus allow you to specify and set up the printer port
type, including Ethernet or parallel port.
I/O PORT
SETUP
To advance to the next screen, press
Item/Enter
.
2.4.2 Ethernet
ETHERNET
OFF/ON [ON]
Select
ON
to enable Ethernet network communication.
ETHERNET SPEED
AUTO DETECT/1O TWISTED PAIR/10 AUI/100 [AUTO DETECT]
Select
AUTO DETECT
to automatically detect the speed at which data can
be transferred over the Ethernet network, or optionally specify the speed
and cabling of your Ethernet network.
2.4.3 Parallel Port Setup
In addition to receiving print jobs over Ethernet, the printer can receive print
jobs from a computer through the high speed parallel port.
PARALLEL PORT
OFF/ON [ON]
Use this option to enable printing through the parallel port.
I/O TIMEOUT
0-300 SECONDS [30 SECONDS]
If parallel port is set to
ON
, use this option to specify how long the printer
waits without receiving data from the parallel port before deciding that the
current job is complete. During the timeout, the printer cannot receive new
jobs through the parallel port, but it continues to receive network print jobs.
2.4 Specifying network information