Xerox DocuColor DocuColor 4, Administrator'S Manual, Page: 102 / 166

4
80
Up to eight bindery servers, whether in native 3.x mode or in 4.x emulation,
can connect to the DocuColor 4 LP/CP.
If your server is using NetWare 3.x, proceed to “Setting up a DocuColor 4
LP/CP print queue for bindery” on page 82.
In order to set up the NetWare 4.x server in bindery emulation mode for
printing to the DocuColor 4 LP/CP, the network administrator must do the
following:
•
Determine the Directory Services path to the container in which the print
server and the print queue for the DocuColor 4 LP/CP will be created.
The container defines the “bindery context” for your network structure.
•
Edit the network startup file to set the bindery context.
•
Activate the new bindery context.
This section describes the second and third steps. Given the variety of pos-
sible network structures, it is impractical to suggest a bindery context that
applies to every network.
To set the bindery context (The following should be completed
by the System Administrator):
Establish a connection with the server which will have the DocuColor 4
LP/CP queue.
This is best done by the network administrator from the server console.
It can also be done remotely using the RCONSOLE utility. For more
information, refer to your NetWare documentation.
At the NetWare server console, type load install.
The Installations Options menu is displayed.
4.3 Configuring a NetWare server for printing