OPERATING SYSTEM SOFTWARE (OSS) MESSAGES
OS1368
Invalid logo file format: filename.
You specified a logo file that has an invalid header format.
Action
Check your input and specify a correct header.
OS1380
Alignment is n scan lines and n dots.
The system is informing you that your printed data will appear at
the indicated number of lines (76 to 260) from the top and
bottom edges of the paper, and the indicated number of dots (0
to 795) from the right to left edges of the paper.
Action
None.
OS1381
Diagnostic alignment is n scan lines and n dots
The system is providing alignment information for use by service
personnel.
Action
None.
OS1390
Invalid scan or dot value. Retry align.
You entered an alignment number for dots or lines that is not
within the permitted range.
Action
Reenter the ALIGN command with values within the permitted
range. Refer to the Xerox 4850 HighLight Color LPS Operator
Guide or to the Xerox 4890 HighLight Color LPS Operator
Guide.
OS1391
Invalid scan or dot value. Retry align.
The system is reporting incorrect alignment values for use by
service personnel.
Action
None.
OS1400
Sample ignored . . . printer idle.
You pressed <SAMPLE> when the printer was not imaging a
page. The system was unable to produce a sample page.
Action
Continue to press <SAMPLE>until the printer delivers a sample
page.
OS1401
Sample ignored . . . Already in progress
The system is processing your first sample request and is not
accepting your second sample request.
Action
None.
9-24
XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE
