GENERAL FLOPPY UTILITY (FLF) MESSAGES
FL1025
Syntax error
You incorrectly entered a parameter or command.
Action
Refer to the Xerox 4850/4890 HighLight Color LPS Command
Reference for more information.
FL1030
Aborting duplicate process
The system cannot read the floppy disk that contains the
information you want to copy and automatically aborts the
copying process.
Action
None.
FL1031
Format failed . . . Aborting duplicate
The system cannot format the floppy disk and automatically
aborts the copying process.
Action
Replace the floppy disk in the drive.
FL1032
Aborting label
You requested the system to abort the relabel function.
Action
None.
FL1033
File not found:
The file you entered does not exist on the disk, or is not stored
in the location you specified.
Action
Verify the filename and its location and reenter the command.
FL1035
Target floppy has bad blocks
There are sectors on the floppy disk to which data cannot be
stored.
Action
Replace the floppy disk in the drive.
FL1040
Any Pre-existing data on this floppy will be destroyed
The system detected information currently stored on the floppy
disk and is alerting you that it must remove all data from the
floppy disk before proceeding with your requested function.
Action
•
Press <ENTER> to continue with the requested function and
remove the data.
•
Enter A to abort the requested function.
FL1045
Current floppy label is:
The system displayed the name of the label that you requested
for the floppy disk.
Action
None.
5-2
XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE
