HOST INTERFACE PROCESSOR (HIP) MESSAGES
HP1299
XPAF communications recovered.
Communication with the XPF host has resumed after a printer
crash. If the job being transmitted at the time of the crash can
be recovered, transmission of that job will resume.
Action
None.
HP1300
Assuming negative confirmation.
A confirmation prompt requiring a yes or no response was
displayed. You did not enter a response within the system’s time
limit of 30 seconds. The system is responding as if you entered
No.
Action
If you intended to enter Y, reenter the command and respond
to the prompt within the time frame.
HP1320
Function is not supported by current host.
The function you requested cannot be carried out by the
selected host.
Action
None.
HP1325
Command not permitted by current logon level
You entered a command that cannot be accepted at your current
logon level.
Action
Log on at a higher level or do not enter the command.
HP1330
Buffersize = n blocks. Utilization = n
n blocks used, n blocks available.
You entered the HIP SHOW BUFFER command and the system
identified the current number of blocks available and the amount
of the buffer already in use.
Action
None.
HP1340
Known and current HOSTs are: name name
You entered the HIP SHOW HOSTS command and the system
identified the available and the currently used HIP hosts for your
system.
Action
None.
HP1410
End of HIP diagnostic.
You entered the HIP DIAGNOSTIC command with the 871 or
DMR host selected and the diagnostic test completed.
Action
None.
7-8
XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE