OPERATING SYSTEM SOFTWARE (OSS) MESSAGES
OS2737
Command not supported on this configuration
Your configuration does not support the command you entered.
Action
1. Refer to the Xerox 4850/4890 HighLight Color LPS Command
Reference to locate the correct command.
2. If you cannot locate the information, contact your service
representative.
OS2740
JDE not found. Check and retry.
The JDE you entered with the START command does not exist on
the system disk.
Action
Reenter the START command using the correct JDE.
OS2741
JDL not found. Check and retry.
The JDL you entered with the START command does not exist on
the system disk.
Action
Reenter the START command using the correct JDL.
OS2745
Enter password for document password
This job requires a password before it can be processed.
Action
Enter the correct password for the job.
OS2750
Job not found. Check & retry.
The job id number you entered with the START command was
incorrect.
Action
1. Reenter the START command using the correct job number.
2. If the message reappears, resend the job.
OS2760
DJDE processing error: Logo file not found.
The system could not locate the logo file you specified.
Action
1. Reenter the command specifying the correct file.
2. If the message reappears, load the file you need to the
system disk.
OS2800
MOVE or SPACE function complete.
The system completed spacing over information on the magnetic
tape.
Action
Perform one of the following actions:
•
If the place where you want to resume input has the same
JDE and JDL as before the SPACE command was entered,
enter the CONTINUE I command.
•
If the JDE and JDL are different than before the SPACE
command was entered, enter the CONTINUE command
followed by a new JDE and JDL ID (CON jde jdl).
9-60
XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE