OPERATING SYSTEM SOFTWARE (OSS) MESSAGES
OS6705
DJDE error - Illegal page interleaved graphic callout
One page of the current job contains DJDEs calling out standard
interleaved graphics on the same page. The system aborts the
job.
Action
1. Recode the DJDE to eliminate one of the interleaved graphics
on that page or to reposition the page break to avoid having
both types of interleaved graphics on the same page.
2. Restart the job.
OS6706
DJDE error - Illegal disk interleaved graphic callout
The current job contains a DJDE specifying a shared disk (SD)
interleaved graphic. The system cannot call up the graphic
because the job was not sent through the shared disk interface.
The system aborts the job.
Action
1. Recode the DJDE, using a standard interleaved graphic callout
instead of an SD callout. The interleaved graphic parameter
should be T instead of D.
2. Restart the job.
OS6709
DJDE processing error: SEF file not found.
The system cannot process your DJDE because the short-edge-
feed (SEF) mapping file you requested is not present in the
system.
Action
Verify the SEF mapping filename and reenter the DJDE.
OS6710
DJDE processing error: STOCKSET file not found.
A DJDE stockset callout within the job is not present on the
system disk.
Action
1. Enter the correct stockset.
2. If the problem continues, contact your service representative.
OS6711
DJDE processing error: JDE not found.
The JDE invoked by the DJDE statement JDE = jde-id does not
exist in the selected JDL.
Action
1. Perform one of the following actions:
— Enter the CONTINUE I command to process the job.
The DJDE is ignored.
— Enter the ABORT I command to cancel the job.
2. Recode the DJDE to reference a different JDE.
3. Restart the job.
XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE
9-85
