HOST INTERFACE PROCESSOR (HIP) MESSAGES
HP2400
HIP interface must be OFFLINE. Enter ’HIP OFFLINE’.
You entered a command for which the HIP must be offline but
the HIP was online.
Action
1. Enter the HIP OFFLINE command.
2. Reenter original command.
HP2410
Abort current transmission: confirm with ’Y’.
You entered the HIP DIAGNOSTIC command while a file was
being transferred to the printer.
Action
Enter Y to abort the transmission or N to cancel the command.
HP2420
Defer HIP diagnostic until OCS queue idle.
You entered the HIP DIAGNOSTIC command while a job was
queued or being processed. This command is ignored.
Action
1. You can wait until all jobs print, enter the ABORT JOB
command to cancel the job (if only one remains), or enter
the RESET command to cancel all jobs.
2. Reenter the HIP DIAGNOSTIC command to proceed with
diagnostics.
HP2500
CHANGE of Job name to file-type failed error type
Unrecoverable I/O error: n
The HIP CHANGE command failed due to the error type
specified in the message. The error value is one of the
following:
•
03 disk controller failed
•
04 disk parity error
•
24 device full (insufficient space for file)
•
32 input file read error
•
56 output file write error
•
59 disk device fault (unable to perform operation).
All error types (except 24) generate an entry in the error log.
Action
If value 24 is received, ask your analyst or programmer at your
company to free up sufficient contiguous system disk space by
deleting unnecessary files or compressing the disk.
The analyst or programmer should not compress the disk where
the HIPBF.SYS file resides because the HIP files will become
inaccessible.
HP5000
HOST restarted. Trying to re-establish communications.
A communications failure occurred while data was being
transferred between the printer and the DMR host. HIP is
attempting to reestablish communications with the host and
resume operation from the point where the failure occurred.
Action
None.
XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE
7-13
