manualshive.com logo in svg

Xerox 4850 HighLight Color, Message Manual, Page: 186 / 280

Share
Download
Xerox 4850 HighLight Color Message Manual Download Page 186

PRINTER SUBSYSTEM CONTROLLER (PSC) COMMAND MESSAGES

PS1086

SCSI downloaded at system load, firmware version n

The enhanced SCSI firmware is downloaded.  The number
indicates the current version of the firmware.

Action

None.

PS1087

HP-SCSI A downloaded at system load, firmware version n

The HP-SCSI firmware is downloaded to controller A.  The
number indicates the current version of the firmware.

Action

None.

PS1088

HP-SCSI B downloaded at system load, firmware version n

The HP-SCSI firmware is downloaded to controller B.  The
number indicates the current revision of the firmware.

Action

None.

PS1190

Invalid syntax

The PSC command line contains incorrect syntax.

Action

Enter the command using the correct syntax.  

PS1191

Invalid RIP Device(s)

One (or more) invalid RIP board index was entered.

Action

Enter the PSC command using a valid RIP index (or indexes).

PS1192

Invalid--SCSI download unsupported via user command

The command line contains incorrect syntax.  The system
encountered an error and could not complete the download.

Action

Enter the command using the correct syntax.  If the message
reappears, contact your service representative.

PS8888

PSC cannot complete due to an unrecoverable error
. . . Warning: software/hardware mismatch

The system encountered an error and was unable to complete
the download.

Action

Contact your service representative.

PS9000

Printer failure.  Enter ’PROBLEM’

A printer failure occurred.

Action

Enter the PROBLEM command and respond to the messages
appearing on the display as appropriate.

12-4

XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE

Summary of Contents for 4850 HighLight Color

























































































































































































































































































Reviews:

No comments