16.
Status file services (SFS)
command messages
The following messages refer to the status file services (SFS)
command, which creates, clears, displays, prints, and stores
status file information. Refer to the Xerox 4850/4890 HighLight
Color LPS Command Reference for more information on the SFS
command.
SF1000
JOB COMPLETED SUCCESSFULLY
The system completed the internal process required for the
requested status file activity.
Action
None.
SF1100
TASK ABORT
The system was unable to complete the SFS task because the
status file is missing or inaccessible.
Action
Initiate the SFC command to run SFC. Refer to the Xerox
4850/4890 HighLight Color LPS Command Reference for more
information on the SFC command.
SF1200
ERROR IN USER-CREATED FORM FILE
You entered the SFS filename command to create a user-created
form. You specified a keyword or value incorrectly, and the form
will not be produced.
Action
Enter the SFS filename and form commands correctly to create
the form. Make sure that SFC has created the status file.
SF2000
* HIT ANY KEY FOR MORE *
You entered the SFS DISPLAY command, and the status file
contains more information than will fit on the system controller
display.
Action
Press any key on the keyboard to display additional status
information.
SF2010
* ENTER C TO CONTINUE, OTHERS TO ABORT *
Your screen is full and cannot display any more information.
Action
Enter C to continue viewing or any other key to abort the
display.
XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE
16-1
