QUEUE MANAGEMENT (QM) MESSAGES
QM1075
Queue is full -- INPUT is waiting.
The queue has become full because the Queue Manager cannot
schedule any reports to OUTPUT. There are no more entries
available to INPUT for the next report. The following messages
accompany this message:
QM2000 Enter CONTINUE Q to resume printing
QM2010 Change housing or
QM2020 Enter appropriate SUB INK command or
QM2025 Enter STITCH OFF if stitcher is not functional
Action
Perform the actions specified by the accompanying messages.
QM1076
Queue successfully cleared
You entered the CLEAR QUEUE command, and the system has
initialized the queue database file QUE.SYS.
This message also displays if you select option 4, Do Not
Recover: Clear Queue, from the Job Recovery menu. Select
option 4 only after trying the first three options available on the
Job Recovery menu. Option 4 reinitializes the entire queue, and
any history of previous jobs and reports is lost.
Action
None.
QM1077
Initializing Queue Manager.
The system initialized the queue database file QUE.SYS. This
occurs during the Queue Manager’s initialization process, when
you enter the INITIALIZE QUEUE or CLEAR QUEUE command, or
when you select option 4, Do Not Recover: Clear Queue, from
the Job Recovery menu.
Action
None.
QM1078
Resetting the queue
You selected option 3, Do Not Recover: Reset Queue, from the
Job Recovery menu. Select option 3 only after trying the first
two options available on the Job Recovery menu. When you
select option 3, all queue entries are marked RCVYN/S (recovery
not specified) and are not printed.
Action
None.
QM1080
Queue Display mode is CLASSIC
You entered the SET QUEUE DISPLAY CLASSIC command. The
system is confirming the CLASSIC option for the JOBS display.
Action
None.
XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE
13-5
