PRINTER SUBSYSTEM CONTROLLER (PSC) COMMAND MESSAGES
PS9009
Problem with AIPOS.SYS -- file missing or invalid
The system encountered problems with accessing or reading the
AIP firmware file.
Action
1. Enter the PSC AIP command to download again.
2. If the message reappears, perform a sysgen or DSR restore.
3. If the problem persists, contact your service representative.
PS9010
***Fatal error*** No Header on RIPOS.SYS file
The RIP operating system file has no header.
Action
Contact your service representative.
PS9011
***Fatal Error*** Problem with RIPOS.SYS file
The RIP operating system file has an unspecified problem.
Action
Contact your service representative.
PS9012
***Fatal Error*** Problem with SCSIOS.SYS file
The system detected a problem with the SCSIOS.SYS file, and the
data cannot be downloaded to the SCSI controller.
Action
Contact your service representative.
PS9013
***Fatal Error*** No header on SCSIOS.SYS file
The SCSIOS.SYS file has an incorrect header, and the file is
corrupted.
Action
1. Perform a sysgen or DSR restore.
2. If the problem persists, contact your service representative.
PS9014
***Fatal Error*** Problem with CRIBOS.SYS file
The system cannot open the CRIBOS.SYS file.
Action
1. Make sure the CRIBOS.SYS file is in the system.
2. If the file is in the system, enter the PSC CRIB command to
download again.
3. If the file is missing, perform a sysgen or DSR restore.
4. If the problem persists, contact your service representative.
PS9015
***Fatal Error*** No header on CRIBOS.SYS file
The system detected an incorrect header in the CRIBOS.SYS file.
Action
1. Enter the PSC CRIB command.
2. If the message reappears, perform a sysgen or DSR restore.
3. If the problem persists, contact your service representative.
12-6
XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE
