OPERATING SYSTEM SOFTWARE (OSS) MESSAGES
OS6520
Cannot read index page data block.
The system cannot read the index page data block due to a
hardware malfunction on the system disk.
Action
Contact your service representative.
OS6550
Data not formatted as specified; Space to next report.
The JSL does not correctly describe the record or block format.
Action
1. Perform one of the following actions:
— Enter the SPACE 1 REPORTS command to go to the next
report.
— Enter the ABORT job command to cancel the job.
2. Recode the JDE statements.
3. Restart the job.
OS6555
Interpress data extraction error.
An error occurred when the software was decoding information
from the Interpress master.
Action
1. Check for additional messages or instructions on the
keyboard display.
2. If the problem continues, contact your service representative.
OS6560
Error encountered during Interpress job.
An error occurred while an Interpress job was running.
Action
1. Check for additional messages or instructions on the
keyboard display.
2. If the problem continues, contact your service representative.
OS6561
Interpress error code = nn.
The Raster Image Process (RIP) detected an error. The error
message matches the error message on the Interpress summary
sheet for the document. The only code expected is 375
8
, which
indicates the page is too complex to print with RIP.
Action
1. Download the RIP software using the PSC RIP command and
resend the document.
2. If the problem continues, contact your service representative.
OS6562
Ink index n out of range (1-n).
You specified an ink that is not available, and the system
substituted black ink. The inks in the current ILIST ink lists are
referenced by index values in the range 1 to n.
Action
Specify a value within the range indicated in the message.
9-82
XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE
