manualshive.com logo in svg

Xerox 4850 HighLight Color, Message Manual, Page: 234 / 280

Share
Download
Xerox 4850 HighLight Color Message Manual Download Page 234

INTERPRESS (IP) ERROR MESSAGES

Xerox EPS Print Service of April-93
Document: ”documentName”
Created by: creator
Created: creationDate
Requested by:  requestor
Printed: dd-Jan-yy hh:mm:ss
Printed: dd-Feb-yy hh:mm:ss
Printed: dd-Mar-yy hh:mm:ss
Printed: dd-Apr-yy hh:mm:ss
Printed: dd-May-yy hh:mm:ss
Printed: dd-Jun-yy hh:mm:ss
Printed: dd-Jul-yy hh:mm:ss
Printed: dd-Aug-yy hh:mm:ss
Printed: dd-Sep-yy hh:mm:ss
Printed: dd-Oct-yy hh:mm:ss
Printed: dd-Nov-yy hh:mm:ss
Printed: dd-Dec-yy hh:mm:ss
Printed for:  recipientName

These messages are included if printing instructions are present
in the document.  Most of the messages are generated by
information in the printing instructions.  If a particular message is
not included, the printing instructions in the document did not
define the corresponding entry. 

Action

None.

Master error messages

Master error messages begin with the text:

Master Error (page n):

The text following the colon differs, depending on the type of
error the system encounters.   The varying portions of the error
messages follow in alphabetical order.

Disk problem with insert file: “file type filename.”

An error was found while reading the system disk.  The system
disk has one or more bad sectors that are not in the bad block
file.

Action

1. Rename the file to a well-known name (such as

BADBKn.SYS).

2. Recopy the file to the LPS.

3. Resend the document.

18-14

XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE

Summary of Contents for 4850 HighLight Color

























































































































































































































































































Reviews:

No comments