OPERATING SYSTEM SOFTWARE (OSS) MESSAGES
OS1104
Failed to connect to the IOT. Exiting.
FEX cannot establish communications with the printer because a
job is printing.
Action
Restart FEX when the LPS is not actively printing a job.
OS1105
No valid machine serial number received. Task exiting.
The system attempted to produce a billing report but could not
find the printer serial number.
Action
If authorized to do so, perform a sysgen and enter the serial
number (located on a panel inside the printer) when instructions
on the display ask for it. Refer to the Xerox 4850/4890 HighLight
Color LPS System Programming and Administration Guide, or
contact your service representative for additional assistance.
OS1106
Lowercase characters not valid in machine serial number
The system does not process lowercase characters in the
machine serial number.
Action
Specify the serial number using uppercase characters.
OS1130
Tray/Bin unavailable
The printer does not allow you to use the requested tray.
Action
1. Verify the tray or bin in your command or select a different
tray.
2. Retry the command.
OS1131
FEX: Problem communicating with the IOT. Exiting.
FEX detected a problem in communicating to the printer.
Action
Restart FEX.
OS1132
- - - NVM Finishing Locations - - -
The system is displaying the values that are currently in the
nonvolatile memory of the printer.
Action
Record these values so that you can restore them if a FEX
communications problem deletes them from the nonvolatile
memory (NVM) of the printer.
OS1133
FEX: Warning, number of pages is greater than 23.
The system is informing you that you have selected too many
pages for the FEX test print job. This message displays only if
your finishing device requires adjustments for sets of more than
23 pages. Consult your finishing device documentation for
additional information.
Action
1. Select fewer pages for the test print job.
2. Restart FEX.
9-14
XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE