7.
Host Interface Processor
(HIP) messages
These messages may appear on your system controller display if
printer communications have been established through the Host
Interface Processor (HIP).
This chapter lists and describes each HIP message and provides
the appropriate actions to take as required. Refer to your Xerox
4850/4890 HighLight Color LPS Command Reference for
additional information.
HP0010
HOST Interface Processor loaded.
HIP was not loaded and you entered a HIP command, which
caused the HIP task to be loaded into memory.
Action
None.
HP0020
HOST Interface Processor unloaded.
You entered the HIP END command. HIP has been unloaded
from memory.
Action
None.
HP0030
Logging enabled
You entered the HIP LOG command while XNS logging was
enabled, or you entered the HIP LOG START command to enable
logging.
Action
None.
HP0031
Logging disabled
You entered the HIP LOG command while XNS logging was
disabled, or you entered the HIP LOG STOP command to disable
XNS logging.
Action
None.
HP0100
STOPPED ONLINE.
HIP was online and submitting jobs for printing. Then an Input
or Output error caused a HIP job to abort, or you entered a HIP
command that caused HIP to stop submitting jobs (HIP STOP,
HIP END, or HIP START job-id).
Action
To resume submitting jobs, enter the HIP START command.
XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE
7-1
