DISK SAVE AND RESTORE (DSR) COMMAND MESSAGES
DS9030
File structure integrity error . . . DSR aborted
This message occurs during the DSR process of saving disk files
to tape. The system encountered blocks that were not allocated
or were allocated multiple times. The DSR process was canceled.
Action
1. Enter the COMPRESS command.
2. If the compress procedure fails, reformat the disk. Refer to
your Xerox 4850/4890 HighLight Color LPS Operator Guide.
DS9040
System error . . . DSR aborted
An unspecified hardware error caused the DSR task to abort.
Action
1. Retry the DSR task.
2. If the problem continues, contact your service representative.
DS9050
File structure integrity error on n . . . DSR aborted
The disk drive you specified has a corrupted file structure. A
format is required.
Action
Reformat the system disk. Refer to your Xerox 4850/4890
HighLight Color LPS Operator Guide.
DS9070
Tape or cartridge not in system or offline
The tape or cartridge you specified is offline or does not exist.
Action
Make sure you are specifying the correct tape or cartridge and
retry the command.
XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE
3-3
