DOCUPRINT 4050, 4090, 4850, 4890, AND 92C IPS MESSAGES
3-10
XEROX DOCUPRINT IPS MESSAGES GUIDE
E226
Bottom transport leading edge jam.
The paper fed from the HCF did not arrive at the bottom transport
switch in time, causing a jam.
Action
Clear the jam from area 2a and press the [Continue] button. (Refer to
the
Xerox DocuPrint 4850/4890
or
92C IPS Troubleshooting Guide
for the procedure.)
E227
Bottom transport trailing edge jam.
The paper fed from the HCF did not leave the bottom transport switch
in time, causing a jam.
Action
Clear the jam from area 2a and press the [Continue] button. (Refer to
the
Xerox DocuPrint 4850/4890
or
92C IPS Troubleshooting Guide
for the procedure.)
E228
Top transport leading edge jam.
The paper did not arrive at the top transport switch in time, causing a
jam.
Action
Clear the jam from areas 6 and 6a and press the [Continue] button.
(Refer to the
Xerox DocuPrint 4850/4890
or
92C IPS
Troubleshooting Guide
for the procedure.)
E238
Rotator top transport trailing edge jam.
The paper did not leave the top transport switch in time, causing a
jam.
Action
Clear the jam from areas 6 and 6a and press the [Continue] button.
(Refer to the
Xerox DocuPrint 4850/4890
or
92C IPS
Troubleshooting Guide
for the procedure.)
E241
XAN failed memory or communications test.
The XAN memory and communication test was unable to complete
successfully.
Action
Press the [Continue] button. If the error persists, contact your service
representative.
E243
Low fuser oil detected -- call service.
The fuser lubricant is low. The printer is losing lubricant.
Action
Contact your service representative.
E244
Low fuser oil detected -- add two tubes of fuser lubricant.
The fuser lubricant is low.
Action
Use two tubes of fuser lubricant to replace the fuser oil. (Refer to
Guide to Performing Routine Maintenance for the procedure.)
