DOCUPRINT 4050, 4090, 4850, 4890, AND 92C IPS MESSAGES
3-34
XEROX DOCUPRINT IPS MESSAGES GUIDE
J217
4850/4890/92C IPS only:
Interpolation overflow detected.
An error occurred while converting 300 dot per inch (dpi) data to 600
dpi.
Action
No action is required. If the error persists, contact your service
representative.
J230
Dicorotron 1 fault.
The charge 1 shield voltage or the charge 1 shield current is not
within the acceptable level.
Action
No action is required. If the error persists, contact your service
representative.
J232
Charge 2 shield voltage at max.
The current charge value exceeded 204 bits during cycle up.
Action
No action is required. If the error persists, contact your service
representative.
J246
Transfer blade solenoid failed the engage.
There is a printer process control error.
Action
Press the [Continue] button. If the error persists, contact your service
representative.
J247
Transfer blade solenoid failed to disengage.
There is a printer process control error.
Action
Press the [Continue] button. If the error persists, contact your service
representative.
J261
XAN realtime clock fault.
Indicates that an unsuccessful read of the real time clock has
occurred.
Action
Press the [Continue] button. If the error persists, contact your service
representative.
J322
TAC sensor dirty.
More than 12 attempts were made to calibrate the TAC sensor.
Action
Press the [Continue] button. If the error persists, contact your service
representative.
