DOCUPRINT 4050, 4090, 4850, 4890, AND 92C IPS MESSAGES
3-40
XEROX DOCUPRINT IPS MESSAGES GUIDE
P205
GWR detected SDLC communication failure.
An error occurred in the printer SDLC link.
Action
No action is required. If the error persists, contact your service
representative.
P206
Lost communication with PSP.
An error occurred in the printer HDLC link after it was established.
This error may occur when the Printer Controller is restarted at the
printer. This is a system communication fault.
Action
No action is required. If the error persists, contact your service
representative.
P207
Major ROS malfunction in image area.
The laser system detected a major image fault. The system may
recover without any further intervention.
Action
Obtain and discard any purged output and press the [Continue]
button. If the error persists, contact your service representative.
P208
ROS purge -- malfunction detected in active image area.
The laser system detected an error in the active image area that
caused an imaging error. The unusable sheets are purged and the
affected pages are reimaged.
Action
Obtain and discard any purged output and press the [Continue]
button.
P209
PSP requests Sheet Retry.
A system communication error occurred.
Action
No action is required. If the error persists, contact your service
representative.
P210
ESS Print Command not received.
A system communication error occurred.
Action
No action is required. If the error persists, contact your service
representative.
P211
ESS retry limit reached.
The printer has attempted to reprint the page three times
unsuccessfully.
Action
Resend the job. If the error persists, contact your service
representative.
