DOCUPRINT 4050, 4090, 4850, 4890, AND 92C IPS MESSAGES
XEROX DOCUPRINT IPS MESSAGES GUIDE
3-37
L180
Stacker elevator tray full or not empty prior to size adjust or
stitch capacity reached.
Either the stacker tray is full, a previous job was not removed prior to
sending a new job, or the maximum number of stapled documents
has been reached.
Action
Empty the output tray and press the [Continue] button.
L182
Stitch head not at home position.
The stitch cam head is not moving to the home position during the
stitch cycle.
Action
Restart the system. If the error persists, contact your service
representative.
L183
Stacker elevator tray full or not empty prior to size adjust or
stitch capacity reached.
Either the stacker tray is full, a previous job was not removed prior to
sending a new job, or the maximum number of stapled documents
has been reached.
Action
Empty the output tray and press the [Continue] button.
L184
Stitch Head fails to move off home.
The stitch cam head is not moving from the home location during the
stitch cycle.
Action
Press the [Continue] button. If the error persists, contact your service
representative.
P012
GWR lost pitch reset.
There is a CDM or GWR board failure, or a harness problem
occurred between the CDM and GWR.
Action
Contact your service representative.
P013
GWR lost machine clock.
There is a CDM or GWR board failure, or a harness problem
occurred between the CDM and GWR.
Action
Contact your service representative.
P016
GWR failed memory/communication test.
A GWR board failure occurred.
Action
Contact your service representative.
