DOCUPRINT 4050, 4090, 4850, 4890, AND 92C IPS MESSAGES
XEROX DOCUPRINT IPS MESSAGES GUIDE
3-3
C081
Tray 4 has low paper.
Input tray 4 is almost out of paper.
Action
Add paper to input tray 4. Close paper tray 4 and press the [Continue]
button.
C082
Tray 4 down due to unlock button being pressed.
The Tray Unlock button was pressed and input tray 4 is open.
Action
Add paper to tray 4, if necessary. Close paper tray 4 and press the
[Continue] button.
C103
Paper tray 1 fault -- Select tray 2.
An error or paper jam occurred in input tray 1.
Action
Open and close tray 1 and clear any jammed sheets. Retry the
operation. If the error persists, specify input tray 2 for the job and retry
the operation. Contact your service representative for the tray 1 fault.
C104
Paper tray 2 fault -- Select tray 1.
An error or paper jam occurred in input tray 2.
Action
Open and close tray 2 and clear any jammed sheets. Retry the
operation. If the error persists, specify input tray 1 for the job and retry
the operation. Contact your service representative for the tray 2 fault.
C105
Check paper supply in tray 1.
The paper supply is low in paper tray 1.
Action
Add paper to input tray 1. Close paper tray 1 and press the [Continue]
button.
C106
Tray 1 wait station sensor not made, but SFRS made.
The paper did not arrive at the wait station sensor in time, or there
was no paper at the wait station when the feed was attempted.
Action
Clear feeder tray 1. Close paper tray 1 and press the [Continue]
button.
C107
Sheet didn’t clear tray 1 wait station sensor.
There is a paper jam in feeder tray 1. The sheet did not clear the tray
1 wait station sensor.
Action
Clear the jam from feeder tray 1. Close paper tray 1 and press the
[Continue] button.
