XEROX DOCUPRINT IPS MESSAGES GUIDE
3-1
3.
3
DocuPrint 4050, 4090, 4850,
4890, and 92C IPS messages
This chapter contains a list, in alphabetical order by code, of the
messages that you may encounter while using your Xerox DocuPrint
4050, 4090, 4850, 4890, or 92C IPS.
Note:
Throughout the messages in this section, ‘%s’ denotes a file
name that will be supplied by the system when the message
displays.
C069
Paper tray 3 fault -- Select another tray.
An error or paper jam occurred in the elevator of input tray 3.
Action
Open and close tray 3 and clear any jammed sheets. Retry the
operation. If the error persists, specify another tray for the job.
Contact your service representative for the tray 3 fault.
C070
Check paper supply in tray 3.
The paper supply is low in paper tray 3.
Action
Add more paper to paper tray 3. Close paper tray 3 and press the
[Continue] button.
C071
Tray 3 wait station sensor not made, but SFRS made.
The paper did not arrive at the wait station sensor in time, or there
was no paper at the wait station when the feed was attempted.
Action
Clear feeder tray 3. Close paper tray 3 and press the [Continue]
button.
C072
Sheet didn’t clear tray 3 wait station sensor.
There is a paper jam in feeder tray 3. The sheet did not clear the tray
3 wait station sensor.
Action
Clear the jam from feeder tray 3. Close paper tray 3 and press the
[Continue] button.
C073
Tray 3 feeder failed to feed sheet from stack to SFRS.
The feeder did not move a sheet from the stack to the stack force
relief sensor in time.
Action
Clear feeder tray 3. Fan and add paper to tray 3. Close paper tray 3
and press the [Continue] button.
