DOCUPRINT 4050, 4090, 4850, 4890, AND 92C IPS MESSAGES
3-2
XEROX DOCUPRINT IPS MESSAGES GUIDE
C074
Tray 3 has low paper.
Input tray 3 is almost out of paper.
Action
Add paper to input tray 3. Close paper tray 3 and press the [Continue]
button. (Refer to the
Xerox DocuPrint 4850/4890
or
92C IPS Guide
to Performing Routine Maintenance
for the procedure.)
C075
Tray 3 down due to unlock button being pressed.
The Tray Unlock button was pressed and input tray 3 is open and
lowered.
Action
Add paper to tray 3, if necessary. Close paper tray 3 and press the
[Continue] button.
C076
Paper tray 4 fault -- Select another tray.
An error or paper jam occurred in input tray 4.
Action
Open and close tray 4 and clear any jammed sheets. Retry the
operation. If the error persists, specify another tray for the job.
Contact your service representative for the tray 4 fault.
C077
Check paper supply in tray 4.
The paper supply is low in paper tray 4.
Action
Add more paper to paper tray 4. Close paper tray 4 and press the
[Continue] button.
C078
Tray 4 wait station sensor not made, but SFRS made.
The paper did not arrive at the wait station sensor in time, or there
was no paper at the wait station when the feed was attempted.
Action
Clear the tray 4 feeder. Close paper tray 4 and press the [Continue]
button.
C079
Sheet didn’t clear tray 4 wait station sensor.
There is a paper jam in feeder tray 4. The sheet did not clear the tray
4 wait station sensor.
Action
Clear the jam from feeder tray 4. Close paper tray 4 and press the
[Continue] button.
C080
Tray 4 feeder failed to feed sheet from stack to SFRS.
The feeder did not move a sheet from the stack to the stack force
relief sensor in time.
Action
Clear the tray 4 feeder. Fan and add paper to tray 4. Close paper tray
4 and press the [Continue] button.
