DOCUPRINT 4050, 4090, 4850, 4890, AND 92C IPS MESSAGES
XEROX DOCUPRINT IPS MESSAGES GUIDE
3-31
J026
HCFR self test output failure.
The HCFR board failed, an off-board problem occurred in an output
device or signal line, or a loss of +24 voltage occurred.
Action
No action is required. If the error persists, contact your service
representative.
J028
MC or Real Time ticks out of spec.
The machine clock or real time per pitch data is out of tolerance.
Action
No action is required. If the error persists, contact your service
representative.
J067
Waste roll bias voltage out of range.
The waste roll bias voltage is out of tolerance.
Action
No action is required. If the error persists, contact your service
representative.
J125
Patches for charge control are out of range.
The process patch used to control the charge was checked
unsuccessfully.
Action
Press the [Continue] button. If the error persists, contact your service
representative.
J144
PHR self test input failure.
The PHR board failed or a PHR input signal line is shorted to the
ground.
Action
No action is required. If the error persists, contact your service
representative.
J145
PHR self test output failure.
The PHR board failed, an off-board problem occurred in a PHR
output device or signal line, or a loss of +24 voltage occurred.
Action
Contact your service representative.
J146
MIR self test input failure.
The MIR board failed or an input signal line is shorted to the ground.
Action
No action is required. If the error persists, contact your service
representative.