DOCUPRINT 96/4635/180 IPS MESSAGES
XEROX DOCUPRINT IPS MESSAGES GUIDE
2-5
03-202
EDN comm problem with the UIM
The EDN cannot communicate with the UIM.
Action
Select the Fault List icon on the printer control console touch screen.
Then touch the [Clear] button to clear the codes. If the error persists,
check the shared lines. If the error still persists, contact your service
representative.
03-203
System comm problem with MIN.
The system is unable to communicate with the MIN.
Action
Select the Fault List icon on the printer control console touch screen.
Then touch the [Clear] button to clear the codes. If the error persists,
check the shared lines. If the error still persists, contact your service
representative.
03-204
System comm problem with PHN.
The system is unable to communicate with the PHN.
Action
Select the Fault List icon on the printer control console touch screen.
Then touch the [Clear] button to clear the codes. If the error persists,
check the shared lines. If the error still persists, contact your service
representative.
03-205
System comm problem with FSN1.
The system is unable to communicate with the FSN1.
Action
Select the Fault List icon on the printer control console touch screen.
Then touch the [Clear] button to clear the codes. If the error persists,
check the shared lines. If the error still persists, contact your service
representative.
03-208
System comm problem with ESS.
One of two communication errors occurred. The System Controller
did not acknowledge receipt of either a data layer or client layer
operation message from the EDN core board. The system failed to
establish data or client layer communications within four minutes of
system startup or within one second after receiving the printer
request for client layer initialization.
Action
Contact your service representative.
03-221
UIM comm problem with CP-IOP.
The UIM cannot communicate with the CP-IOP board.
Action
Select the Fault List icon on the printer control console touch screen.
Then touch the [Clear] button to clear the codes. If the error persists,
contact your service representative.
