DOCUPRINT 4050, 4090, 4850, 4890, AND 92C IPS MESSAGES
XEROX DOCUPRINT IPS MESSAGES GUIDE
3-21
F229
Finishing device full.
The output bin of your third-party finishing device is full.
Action
Remove the jobs contained in the device output bin and press the
[Continue] button.
F231
Finishing device not ready.
The third-party finishing device is not ready to perform the task
requested.
Action
Check that the finishing device is connected and ready (refer to the
documentation provided with your third-party finishing device, if
necessary) and press the [Continue] button.
F233
Late arrival to the Bypass Transport Jam Sensor.
The paper did not arrive at the bypass transport jam sensor in time.
A jam has occurred.
Action
Clear the jam in areas 6 or 6A, 19 and 20, and press the [Continue]
button. (Refer to the
Xerox DocuPrint 4850/4890
or
92C IPS
Troubleshooting Guide
for the procedure.)
F234
Late departure from Bypass Transport Jam Sensor.
The paper did not leave the bypass transport sensor in time. A jam
has occurred.
Action
Clear the jam from area 6 and press the [Continue] button. (Refer to
the
Xerox DocuPrint 4850/4890
or
92C IPS Troubleshooting Guide
for the procedure.)
F235
Bypass Transport Cover Open.
The bypass transport cover is not securely in place.
Action
Close the bypass transport top cover and retry the operation. Your
service representative will have to fasten the cover.
F236
Bypass Transport Cover Open in Print Mode.
The bypass transport top cover is not securely in place while the
system is attempting to print.
Action
Close the bypass transport cover and retry the operation. Your
service representative will have to fasten the cover.
F237
Finishing device offline.
The third-party finishing device is not properly docked to the bypass
transport.
Action
Reattach the finishing device, following instructions for your
equipment.
