DOCUPRINT 96/4635/180 IPS MESSAGES
2-20
XEROX DOCUPRINT IPS MESSAGES GUIDE
06-366
Polygon motor fault.
A polygon motor error occurred.
Action
Select the Fault List icon on the printer control console touch screen.
Then touch the [Clear] button to clear the codes.
06-367
Card cage overtemp.
The airflow in the printer card cage will not prevent the electronic
hardware from overheating.
Action
Contact your service representative.
07-211
Tray 1 not up in feed position.
The tray 1 elevator did not arrive at the stack height sensor in time,
or the elevator indexed on more than two consecutive feeds.
Action
Check the paper position in tray 1, lower then raise the tray, and retry
the operation.
07-212
Tray 1 failed to move down.
The tray 1 elevator did not arrive at the tray 1 down or the low paper
sensor in time, or the elevator indexed on more than two consecutive
feeds.
Action
Press the Tray Unlock button and make sure that the tray is pushed
in.
07-214
Tray 1 open in print.
Input tray 1 is open while the system is attempting to print.
Action
Close input tray 1 and press Continue.
07-221
Tray 2 not up in feed position.
The tray 2 elevator did not arrive at the stack height sensor in time,
or the elevator indexed on more than two consecutive feeds.
Action
Check the paper position in tray 2, lower, then raise the tray and retry
the operation.
07-222
Tray 2 failed to move down
The tray 2 elevator did not arrive at the tray 2 down or the low paper
sensor in time, or the elevator indexed on more than two consecutive
feed.
Action
Press the Tray Unlock button and make sure that the tray is pushed
in.
