Xantrex XKW 12-150, Operating Manual

Page: 29 / 90

Revision A
27
Section 2. Installation
Introduction
This section provides recommendations and procedures for inspecting, installing,
and testing the power supply.
Basic Setup Procedure
See Table 2.1 for a summary of the basic setup procedure and an overall view of the
subsections in Section 2 . Use the procedure as a quick reference if you are familiar
with the installation requirements for the power supply. If you want more
information, each step in the procedure refers to subsequent sections which contain
more details. Execute each step in the sequence given.
Table 2.1
Basic Setup Procedure
See Section 3, “Operation” for instructions about front panel operation, OVP, OTP,
shutdown, and using multiple supplies. You will also find remote programming and
monitoring described in the same section.
Step # Description Action Reference
1 Safety Read and follow safety
recommendations
“Inspection, Cleaning, and
Packaging” on page 28
2 Inspection Perform an initial physical
inspection of the supply.
“Inspection, Cleaning, and
Packaging” on page 28
3 Installation Install the supply (bench or rack
mount), ensuring adequate
ventilation.
“Location, Mounting and
Ventilation” on page 31
4 Input Power Connect AC input power.
“AC Input Power” on
page 32
5 Test Perform functional tests for
voltage mode operation, current
mode operation, and front panel
controls.
“Functional Tests” on
page 35
6 Load Connect the load.
“Load Connection” on
page 37
7 Sensing Connect sensing lines.
“Local and Remote
Sensing” on page 43
TM-25OP-01XN.book Page 27 Monday, April 5, 2004 8:58 AM