Xantrex XKW 12-150, Operating Manual

Page: 21 / 90

Features and Specifications
Front Panel Controls
Revision A
19
Front Panel Controls
See Figure 1.1 to review the controls, LEDs, and meters located on the power
supply’s front panel. Check the following sections for additional descriptions of front
panel controls and functions.
•
“Mechanical Specifications” on page 25
•
“Functional Tests” on page 35
•
Section 3, “Operation”
Figure 1.1
Power Supply Front Panel
Over Temperature LED (OTP)
Remote Programming LEDs
(for units with optional programming interface installed) Over Voltage LED (OVP)
Indicates when the output
voltage exceeds the limit set
Shutdown LED (S/D)
Indicates when S/D is activated
by an external S/D signal
Remote LED (REM)
Indicates that the unit is in remote mode
AC Power Switch
Standby Switch (STANDBY) Local OVP Setting Preview
Switch (OVP CHECK)
Local Voltage and Current Limit
Setting Preview Switch (V&I CHECK)
Remote/Local Switch (REM/LOC)
Forces Unit into Remote or Local Mode
TM-25OP-01XN.book Page 19 Monday, April 5, 2004 8:58 AM