Xantrex XKW 12-150, Operating Manual

Page: 49 / 90

Revision A
47
Section 3. Operation
Introduction
All power supplies in this series offer the following features as part of their standard
configuration.
Accessing
Advanced
Features
Accessing these features may require that you use one or more of the following
procedures:
•
Using the front panel REM/LOC (Remote/Local Programming) switch.
•
Reconfiguring the rear panel J3 connector.
•
Making connections to the J3 connector.
•
Resetting internal jumpers JMP1 and JMP2.
•
Resetting internal switch SW1.
“Configuring for Remote Programming, Sensing, and Monitoring” on page 48
provides a reference to the function and location of these controls, and procedures
for making any required changes.
Feature Reference
Remote Programming of Output Voltage and Current Limit with 0-5V,
0-10V, 0-1mA, and 0-5k ohms page 54
Overvoltage Protection (OVP) with front panel controls or 0-5V and
0-10V programming page 62
Programmable Shutdown with AC, DC, or TTL compatible signals and
contact closure page 65
Remote Monitoring of Status Indicators for thermal shutdown, OVP
status, remote/local programming mode, and voltage/current mode
operation page 72
Calibrated Readback Signals for output voltage and output current with
selectable 0-5V or 0-10V scales page 72
Multiple Supply Configurations such as series, parallel, and split
supplies page 73
TM-25OP-01XN.book Page 47 Monday, April 5, 2004 8:58 AM