Xantrex XKW 12-150, Operating Manual

Page: 58 / 90

Operation
Remote Programming of Output Voltage and Current Limit
56
Operating Manual for XKW 3kW Series Power Supply
Figure 3.4
Programming Output Voltage and Current Limit
(with the REM/LOC Switch)
Notes:
1. If you are programming both output voltage and current limit with a 0-10V
source and using the REM/LOC switch, set internal jumpers JMP1 and JMP2 to
their A-B locations before connecting the voltage and current limit programming
inputs.
2. Resetting internal jumpers may require a recalibration of the programming
circuit to maintain programming accuracy. See “Calibrating for Programming
Accuracy” on page 82 for the procedures.
12 8 10
- + - +
CURRENT LIMIT
SOURCE SOURCE
PROGRAMMING PROGRAMMING
VOLTAGE
OUTPUT OUTPUT
OPTIONS OPTIONS
PROGRAMMING SOURCE PROGRAMMING SOURCE
PROGRAMMING PROGRAMMING
WHEN USING 0-10V WHEN USING 0-10V
SEE NOTE BELOW SEE NOTE BELOW
0-5V 0-5V
0-1mA 0-1mA
0-10V 0-10V
+
+
+ +
+
+
14
1
25
13
J3
TM-25OP-01XN.book Page 56 Monday, April 5, 2004 8:58 AM