Xantrex XKW 12-150, Operating Manual

Page: 52 / 90

Operation
Configuring for Remote Programming, Sensing, and Monitoring
50
Operating Manual for XKW 3kW Series Power Supply
Internal Switch and Jumpers If you should need to change any of the standard
configurations of the supply, internal jumpers JMP1 and JMP2, and switch SW1
enable you to select:
•
Voltage and Current Programming Scale Factor
•
Over Voltage Protection (OVP) Programming Mode and Scale
•
Voltage and Current Monitor Range
•
Shutdown Circuit Logic
Figure 3.2
Internal Jumpers and Switch (Default Settings Shown)
SELECTS CURRENT LIMIT
A-B = 0-10V A-B = 0-10V
B-C = 0-5V B-C = 0-5V
RANGE RANGE
PROGRAMMING INPUT PROGRAMMING INPUT
SELECTS VOLTAGE
CLOSED = 0-10V
OPEN = 0-5V
CLOSED = NEGATIVE LOGIC
OPEN = POSITIVE LOGIC
OPEN = REMOTE
CLOSED = LOCAL
OPEN = 0-10V
CLOSED = 0-5V
OPEN = 0-10V
CLOSED = 0-5V
CIRCUIT LOGIC
SELECTS SHUTDOWN
PROGRAMMING MODE
PROGRAMMING RANGE
SELECTS OVP
SELECTS OVP
SELECTS VOLTAGE
MONITOR RANGE
MONITOR RANGE
SELECTS CURRENT
NOT USED
NOT USED
OPEN (OFF)
CLOSED (ON)
2 3 4 5 6 7 8 1
SW1
JMP2 JMP1
A A
B B
C C
TM-25OP-01XN.book Page 50 Monday, April 5, 2004 8:58 AM