G-27
L2800, L3400, WSM
G GENERAL
Checking Fuel Line
CAUTION
• Stop the engine when attempting the check and change
prescribed below.
• Remember to check the fuel line periodically. The fuel line
is subject to wear and aging, fuel may leak out onto the
running engine, causing a fire.
1. Check to see that all line and hose clamps are tight and not
damaged.
2. If hoses and clamps are found worn or damaged, replace or
repair them at once.
NOTE
■
• If the fuel line is removed, be sure to property bleed the fuel
system.
• Refer to "Bleeding Fuel System". (See page G-38.)
W1051696
Adjusting Clutch Pedal Free Travel
1. See page G-19, 20.
W1032922
Adjusting Brake Pedal Free Travel
1. Stop the engine and remove the key, then release the parking
brake.
2. Slightly depressed the brake pedals and measure free travel (A)
at top of pedal stroke.
3. If adjustment is needed, loosen the lock nut (1) and turn the
turnbuckle (2) to adjust the rod length.
4. Retighten the lock nut (1).
5. Other side same as above.
W1033181
(1) Fuel Line
(2) Clamp Band
Brake pedal free travel
Factory spec.
15 to 20 mm (0.6 to 0.8
in.) on the pedal
Keep the free travel in the
right and left brake pedals
equal
(1) Lock Nut
(2) Turnbuckle
A : Free Travel
KiSC issued 08, 2007 A
Tractor Manuals Scotland - Please Do Not Copy
Tractor Manuals Scotland
