3-S7
L2800, L3400, WSM
TRANSMISSION (MANUAL TYPE)
Steering Wheel and Rear Bonnet
1. Remove the steering wheel (1) with steering puller.
2. Remove the throttle grip (2).
3. Disconnect the hour-meter cable from the engine.
4. Remove the meter panel (3).
5. Disconnect the 4P connector (5) for main switch.
6. Disconnect the 8P connector (6) for combination switch.
7. Remove the rear bonnet (4).
(When reassembling)
W1012884
Suction Hose and Delivery Pipe
1. Disconnect the suction hose (1).
2. Remove the step (4) mounting screws.
3. Remove the steering joint shaft (2).
4. Remove the delivery pipe (3).
5. Remove the throttle rod (5).
(When reassembling)
• Lift the universal joint so that there should be a clearance (A) of
more than 5 mm (0.19 in.) between the universal joint and
flywheel housing.
Then fit the support (6) in position.
W1045309
Wirings
1. Disconnect the wiring (1) for the alternator.
2. Disconnect the wiring (4) for starter motor.
3. Disconnect the 1P Connector (3) for the engine oil switch.
4. Remove the shutter plate (2).
5. Remove the slow blow fuse (5).
W1045710
Tightening torque
Steering wheel mounting
nut
29.4 to 49.0 N·m
3.0 to 5.0 kgf·m
21.7 to 36.2 ft-lbs
(1) Steering Wheel
(2) Throttle Grip
(3) Meter Panel
(4) Rear Bonnet
(5) 4P Connector
(6) 8P Connector
Tightening torque
Delivery pipe joint bolt
49 to 69 N·m
5.0 to 7.0 kgf·m
36.1 to 50.6 ft-lbs
(1) Suction Hose
(2) Steering Joint Shaft
(3) Delivery Pipe
(4) Step
(5) Throttle Rod
(6) Support
(A) Clearance
(1) Wiring for Alternator
(2) Shutter Plate
(3) 1P Connector
(4) Wiring for Starter Motor
(5) Slow Blow Fuse
KiSC issued 08, 2007 A
Tractor Manuals Scotland - Please Do Not Copy
Tractor Manuals Scotland