1-S34
L2800, L3400, WSM
ENGINE
(3) Connecting Rod and Piston
Oil Pan and Oil Strainer
1. Remove the oil pan mounting screws.
2. Remove the oil pan (1) by lightly tapping the rim of the pan with
a wooden hammer.
3. Remove the oil pan gasket (2).
4. Remove the oil strainer (3) and O-ring.
(When reassembling)
• After cleaning the oil strainer (3), check to see that the filter mesh
in clean, and install it.
• Visually check the O-ring, apply engine oil, and install it.
• Securely fit the O-ring to the oil strainer (3).
• Apply a liquid gasket (Three Bond 1215 or equivalent) to the oil
pan side of the oil pan gasket (2).
• To avoid uneven tightening, tighten oil pan mounting screws in
diagonal order from the center.
W1025687
(1) Oil Pan
(2) Oil Pan Gasket
(3) Oil Strainer
KiSC issued 08, 2007 A
Tractor Manuals Scotland - Please Do Not Copy
Tractor Manuals Scotland