H3-S14
L2800, L3400, WSM
TRANSMISSION (HST TYPE)
Wirings (L.H)
1. Disconnect the wiring (2) for alternator.
2. Disconnect the wiring (3) for starter motor.
3. Disconnect the 1P connector (5) for engine oil switch.
4. Remove the shutter plate (4).
5. Remove the slow blow fuse (1).
W1045710
Wirings (R.H)
1. Disconnect the wiring (1) for the fuel sensorr.
2. Disconnect the starter relay (2), OPC timer (3), glow relay (4) and
flasher unit (5).
3. Disconnect the wiring (6) for glow plug and water temperature
sensor.
4. Disconnect the wiring (7) for engine stop solenoid.
W1046003
Pipe and Wirings
1. Remove the HST return pipe (1).
2. Remove the fuse box (4) and ground cable (5).
3. Disconnect the connector (3) for safety switch.
4. Remove the clutch housing cover (2).
(When reassembling)
W1043042
(1) Slow Blow Fuse
(2) Wiring for Alternator
(3) Wiring for Starter Motor
(4) Shutter Plate
(5) 1P Connector
(1) Wiring for Fuel Sensor
(2) Starter Relay
(3) OPC Timer
(4) Glow Relay
(5) Flasher Unit
(6) Wiring For Glow Plug and Water
Temperature Sensor
(7) Wiring for Engine Stop Solenoid
Tightening torque
HST Return pipe joint bolt
88 to 98 N·m
9.0 to 10 kgf·m
65.0 to 72.2 ft-lbs
(1) Return Pipe
(2) Clutch Housing Cover
(3) Connector for Safety Switch
(4) Fuse Box
(5) Ground Cable
KiSC issued 08, 2007 A
Tractor Manuals Scotland - Please Do Not Copy
Tractor Manuals Scotland